Lip Nurit Assistance

Lipman Compatability & Configuration Tables

COMPATABILITY

ARC, Conversion, Gurantee, Verification, Payroll supported on all terminals.
For ARC a check imager is required.
For Conversion & Payroll a check reader or imager is required.
For Guarantee & Verification a check reader is not required.
On wireless units it will need to access a phone line to perforn transactions.

TERMINAL

The terminal can hold up to 9 seperate MID numbers. ARC can co-exist with conversion or auth only on this terminal. It will operate in stand alone mode without any special procedures.

Avoid the following terminals if using Credit Card svc with ARC:
Model US-3 2085 terminals. Recommend using Model US-21 or higher.
Model US-2 8320 terminals. Recommend using Model US-11 or higher .
Model US-2 8400 terminals. Recomment using Model US-11 or higher.
The 'model' number denotes the memory in the terminal. These models
may not have enough memory to support multiple applications.

PAPER

The paper should be coming off the spool from the bottom into the terminal. If the terminal feeds paper but does not print reverse the roll. Most thermal paper only prints on one side.

CHECK READER/IMAGER CONNECTION DIAGRAMS

Check reader/imager	Setup Requirements
Ingenico 2600	No Config Check Required
Magtek Imager (Image Pak)	Configuration Check Required
RDM 5004i 6004i	No Config Check Required
Magtek Mini Micr	Configuration Check Required
CMR431	Download required +Configuration Check
EN 2500	Download required +Configuration Check
Welch Allen (Value Pak 700)	2 Configuration Checks Required

TELEPHONE

The telephone line should be connected to the jack labeled 'LINE' on the terminal. Other devices can be connected to the jack labeled 'TELE' It is advised that the terminal be the first device in line with the phone line.